Back to Módulo Location
Roadway Components - URBAN 1
Updated May 06, 2016
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Urban section with optional curb/gutter and sidewalk.
Typical Cross Section
Default Material Assignments
Parameters
| bIncludeCurb | Set to 1 to include a curb and gutter. | |
| bIncludeSidewalk | Set to 1 to include a sidewalk. | |
| AcpWidth | Lane width from CL to edge of gutter (excluding gutter). | |
| AcpThick | Thickness of pavement surface. | |
| BaseThick | Thickness of layer. | |
| SubbaseThick | Thickness of subbase layer. | |
| bCurbApplySuper | Set to 1 to superelevate the bottom of the curb. | |
| CurbInsideHeight | Thickness from top of gutter to bottom. | |
| CurbOutsideHeight | Height of curb on the outside. | |
| CurbGutterWidth | Horizontal distance from asphalt to bottom of curb slope. | |
| CurbGutterSlope | Gutter slope (added to super elevation) | |
| CurbBottomWidth | Curb and gutter width - horizontal distance from asphalt to sidewalk. | |
| CurbBottomSlope | Bottom of curb slope. | |
| CurbTopWidth | Curb Width: horizontal distance across the top the curb. | |
| Sod1Offset | Sod1 distance typically from curb to sidewalk. | |
| Sod1Slope | Slope of Sod1 segment. | |
| SdwkWidth | Width of the sidewalk. Set to 0 if no sidewalk. | |
| SdwkSlope | Slope of the sidewalk | |
| SdwkThick | Vertical thickness of the sidewalk. | |
| SdwkBaseThick | Vertical thickness of the sidewalk base. | |
| Sod2Offset | Sod2 offset (typically from sidewalk to edge of shoulder). | |
| Sod2Slope | Slope of Sod2. |